Electrolux EFG10750, User Manual

Page: 40 / 48

40 electrolux
Installation
EN
Ducted Version Air Exhaust Sys-
tem
When installing the ducted version,
connect the hood to the chimney us-
ing either a
fl exible or rigid pipe ø 150
or 120mm, the choice of which is left to
the installer.
To install a ø 150 pipe
• To install the dumper 10
• Fix the pipe in position using suf fi cient
pipe clamps (not supplied).
To install a ø 120 pipe
• To install a ø 120 mm air exhaust
connection, insert the reducer fl ange
9 on the dumper 10 .
• Fix the pipe in position using suf fi cient
pipe clamps (not supplied).
• Remove any activated charcoal fi l-
ters.
Recirculation Version Air Outlet
• Cut a hole ø 125 mm in any shelf that
may be posi-tioned over the hood.
• Insert the fl ange 9 on the hood body
outlet.
• Connect the fl ange to the outlet on
the shelf over the hood using a fl ex-
ible or rigid pipe ø120 mm.
• Fix the pipe in position using suf fi cient
pipe clamps (not supplied).
• Fix the directional grille 8 on the recir-
culation air outlet using the 2 screws
12e (2,9 x 12,7) provided.
• Ensure that the activated charcoal fi l-
ters have been inserted.
ø 120
ø 150
10
10
9
9
ø 125
8
12e
Electrical Connection
• Connect the hood to the mains
through a two-pole switch having a
contact gap of at least 3 mm.