50
Mounting accessories included
1 deflector (3 pieces to assemble)
1 allen spanner (for TORX screws)
1 reduction flange Ø 125-120 mm (Only for model
EFC 1460 X / 942 120 706)
6 wood-screws 6 x 70 mm (for ceiling mounting)
6 wall plugs Ø 10 mm (for ceiling mounting)
14 metal screws 4x7 (for assembly the chimney)
14 nuts (for assembly the chimney)
14 springs
10 metal screws 3x9 (pour assembler la structure
de support)
6 metal screws 4 x 8 (to affix the screen to the
cooker hood)
Attention, for EFC 1420 only !
The deflector and the relative fixing screws are not
supplied when the upper section of the chimney has
no side slots
.
An extension for the support structure has
been provided, including the screws
necessary for fixing the extension.
Preliminary information for
installing the hood
Assembling the deflector (3 parts only for
filter version):
The three parts should be fixed with 2 screws, the
deflector extension is adjustable and should
correspond to the width of the chimney flue
support, to which it is then fixed.
Fig. 9a
.
Installation of the support structure extension
(only for model EFC1420 - PNC 942 120 788):
In the instance where a longer support structure
may be required (for example in cases of
particularly elevated ceilings) then install the
extension:
dismount the flange from the structure by
removing the fixing screws (keep the screws
aside).
apply the extension between the structure and
the flange and affix using 16 screws.
Fig. 9b
.
Fig. 9a
F
G
Fig. 9b
Flange
Extension
Structure
