Electrolux EDH10TRBW1, User Manual

Page: 9 / 20

9 ENGLISH
water drop into the unit. It may cause
electric shock, creepage or failure of
unit.
5.4
Mode selection
If you have chosen DEHUM function, tap
" " button to choose your desired
mode between SMART mode, MANUAL
mode and SLEEP mode.
NOTE:
• The MODE button is disabled when
DRYER function is selected.
Smart mode
When choosing DEHUM fu
SMART mode - the appliance aims to
main the humidity at a comfortable level.
The appliance will automatically adjust fan
speed based on the room humidity level.
NOTE:
• In SMART mode, you cannot adjust the
humidity setting and the fan speed.
Manual mode
When choosing DEHUM function, in
MANUAL mode, tap " " and " " button
to set target humidity in 5% increments
between 35%-85% and tap " " button to
change the fan speed to MIN, MID, MAX.
NOTE:
• Once desired target humidity is
selected, the display screen will shift
back to showing 'current' real-time
humidity level.
Sleep Mode
SLEEP mode is designed to be non-
disturbing. When selected, it will aim to
provide a low noise environment (as
available) with lowest fan speed setting,
dim display.
NOTE:
• In SLEEP mode, cannot set the target
humidity and the fan speed.
• In SLEEP mode, after 10 seconds
without any interaction with the control
panel, the " ", " " and " "
buttons are dimmed to 30% and the
other text, icons will been turned off
completely to be non-disturbing.
5.5
To Run in Continuous
Operation
1.
Choose DEHUM fu MANUAL
mode, then tap the " " button to
reduce target humidity setting below
35% till the display shows "CO" and the
appliance enters Continuous operation.
2.
To exit Continuous Operation (CO)
function, tap the " " or " " button.
You can also adjust the target humidity
setting above 35% to exit this function.
NOTE:
• It is recommended to connect the
drainage hose to dehumidifier when
using in Continuous operation, to prevent
the operation from stopping when the
water tank is full frequently.
5.6
Swing
The air outlet in the appliance has an
in-built louvre. You can turn on this feature,
for the louvre to automatically move up &
down continuously so as to better direct
the air flow.