Electrolux EDH10TRBW1, User Manual

Page: 15 / 20

15 ENGLISH
7.
WHAT TO DO IF...
Before calling for service, review this list. It may save you time and expense. This list
includes common occurrences that are not the result of defective workmanship or
materials in this appliance.
Occurrence Possible Cause Solution
Dehumidifier does
not operate
Wall plug
disconnected.
Push plug firmly into wall outlet.
House fuse blown
or circuit breaker
tripped.
Replace fuse with time delay type or
reset circuit breaker.
The dryness level
you selected has
been reached.
Dehumidifier automatically shuts off
when selected amount of moisture
has been removed from the air. If you
want to remove more moisture, enter
in Continuous operation. After the
dehumidifier starts, reset the control
panel to the desired setting.
Water Tank not
installed properly.
See “ 5.12 Removing Collected Water”.
Water in the water
tank has reached its
preset level.
Dehumidifier automatically turns off when
this occurs. Empty water tank and return
it to position.
Dehumidifier is not
turned on.
Turn unit on.
The programme
/ cycle lasts too
long.
Windows or doors
near dehumidifier
are open to
outdoors.
Close all windows or doors to outside.
Area to be
dehumidified is too
large.
Check with your dealer to see if capacity
is adequate.
Air movement
through dehumidifier
is blocked. Grill may
be dirty.
Use brush attachment of vacuum cleaner
to clean grill. See “ 6. Care, Cleaning and
Storage”. Dehumidifier must be placed in
a space that does not restrict air flowing
into the air intake or outlet.
Dehumidifier has
been installed or
restarted recently.
The higher the moisture in the room, the
longer the dehumidifier will operate.
Dehumidifier is in
the Continuous
operation and will
remain on in this
mode.
Exit this operation.