Electrolux EDH10TRBW1, User Manual

Page: 10 / 20

10 www.electrolux.com
1.
Tap " " button to enable the auto
swing feature, the louvre will swing up
and down automatically.
2. Tap the button again to stop the louvre
at your desired angle/direction.
NOTE:
• Please do not adjust the position of
louvre manually.
• Please ensure louvre is NOT stopped at
completely closed position when
deactivating SWING feature and
appliance still operating, as this cause
overheating.
5.7
Timer
The TIMER feature allows you to have
either Delayed Start OR Delayed Stop for
the appliance, in increments of 0.5 to 1
hours (up-to the max of 12 hours).
1. When the appliance is on, tap " "
button and display should change to
"0.0" to reflect Delayed Stop is initiated.
Tap or hold " " and " " button to
change the time by 0.5 hour
increments, up to 6 hours, then at 1
hour increments up to 12 hours. The
appliance will count down the time
remaining, until appliance switches OFF
by itself.
2. When the appliance is off, tap " "
button and display should change to
"0.0" to reflect Delayed Start is initiated.
Tap or hold " " and " " button to
change the timer setting as mentioned
above. The appliance will count down
the time remaining, until appliance
switches ON by itself.
3. The selected time will be set as target
(registered) when user does not interact
with control panel for 5 seconds after
choosing desired time. Once time is set,
display screen will revert back to show
room humidity levels, tap " " button
once, display screen will show the
remain time.
4.
To exit & cancel the timer feature, tap
" " button twice OR turn the unit ON/
OFF by pressing the power button
anytime OR adjust the timer setting to
"0.0" hours.
NOTE:
• Before entering TIMER setting, make
sure power is being supplied to the
appliance.
• Before entering Delayed Start, make
sure you have chosen your desired
setting, for example, if you want the
appliance turn on and operate with
DEHUM fu MANUAL mode +
50% hu MAX fan speed after 5
hours automatically, tap " ", " ",
" " or " " and " " sequentially to set
your desired setting and turn off the
appliance, then follow step 2 to initiate
the Delayed Start time to 5 hours.
5.8
Ionizer Indicator
Long press " " and " " buttons
simultaneously for 5 seconds to activate/
inactivate the Ionizer feature. When the
Ionizer feature is activated, the " "
indicator will show on the control panel
and the Ionizer is energized to help to
clean the air. This function is
recommended when the indoor air quality
is in bad condition.
5.9
Child Lock Indicator
Long press " " and " " buttons
simultaneously for 5 seconds to activate/
inactivate the Child Lock feature. When the
Child Lock feature is activated, the " "
indicator will show on the control panel
and the control panel is locked.
5.10
Water Tank Full Indicator
When the water tank is full, the indicator
" " lights up and the unit will make a
double short beeps and repeat the sounds
after first double beeps to remind you to