Electrolux EBKGL7CN, User Manual

Page: 21 / 32

• Clean the appliance interior after each
use. Fat accumulation or other food
remains may result in a fire.
• Clean stubborn dirt with a special oven
cleaner.
• Clean all accessories after each use
and let them dry. Use a soft cloth with
warm water and a cleaning agent.
• If you have nonstick accessories, do
not clean them using aggressive
agents, sharp-edged objects or a
dishwasher. It can cause damage to
the nonstick coating.
• Dry the oven when the cavity is wet
after usage.
11.2 Removing the shelf
supports
Before maintenance, make sure that the
appliance is cool. There is a risk of burns.
To clean the appliance, remove the shelf
supports.
1. Pull carefully the supports up and out
of the front catch.
2
3
1
2. Pull the front end of the shelf support
away from the side wall.
3. Pull the supports out of the rear catch.
Install the shelf supports in the opposite
sequence.
11.3 Steam Cleaning
Remove as much dirt as possible
manually.
Clean the inner door glass with a soft cloth
with warm water and a cleaning agent.
Remove the shelf support to clean the
side walls.
CAUTION!
For a better performance you
should start the cleaning
function when the appliance
is cool. Check the residual
heat.
Always use the function after cooking with
steam.
When the function is active, the lamp is
off.
1. Put 400 ml of water mixed with 3
tablespoons of vinegar (without herbs)
directly into the steam generator.
2. In the menu choose: Assisted
Cleaning.
3. Activate the function: Steam Cleaning.
The display shows the duration of the
function (33 minutes).
An acoustic signal sounds when the
programme is completed.
4. Touch a sensor field to deactivate the
signal.
5. Wipe the internal surface of the
appliance with a soft sponge.
6. Remove the remaining water from the
steam generator.
7.
After cleaning keep the appliance door
open for approximately 1 hour. Wait
until the appliance is dry. To speed up
the drying you can heat up the
appliance with hot air at temperature
150 °C for approximately 15 minutes.
You can get maximum effects of the
cleaning function if you manually clean the
appliance immediately after the function
ends.
Use the function two times if the level of
dirt is high. Make sure that the appliance
is cool before you activate the second
cycle.
11.4 Decalcification of the
Steam generator
1. Put 250 ml of water mixed with 3
tablespoons of vinegar directly into the
steam generator.
2. In the menu choose: Assisted
Cleaning.
3. Activate the function: Decalcification.
The display shows the duration of the
function (15 minutes).
ENGLISH 21