织物
温度设置
熨烫建议
腈纶
干熨织物背面。
醋酸纤维
当衣物潮湿时或用喷雾润湿时，干熨织物背面。
尼龙及合成纤维
当衣物潮湿时或用喷雾润湿时，熨烫织物背面。
人造纤维
熨烫织物背面。
粘胶纤维
主要进行干熨。可按照制造商的说明适当使用蒸汽喷射。
丝绸
熨烫织物背面。请使用一片压熨布，以防出现熨烫光斑。
棉混纺
检查衣物标签并按照制造商说明处理。请从织物设置中选择最低设置。
羊毛及羊毛混纺
蒸汽熨烫织物背面或使用压熨布熨烫。
棉质
衣物潮湿时或使用喷雾喷湿时干熨。请使用中高温蒸汽。
绒布
蒸汽熨烫织物背面或使用压熨布熨烫。
亚麻
至“最高”
熨烫织物背面或使用压熨布熨烫，以防出现闪光熨斑，尤其是在熨烫深
色衣物时更要如此。请在衣物潮湿时或喷雾喷湿时干熨。请使用中高温
蒸汽。
牛仔布
至“最高”
请使用最大蒸汽档位熨烫。
不同的熨烫速度和织物湿度可能引起最优设置与上述表格内的推荐数值有所偏差。
小贴士：
请务必先熨烫具有较低温度设置要求的织物，然后再逐渐提高温度设置，熨烫具有较高温度设置要求的织物。此熨斗
的升温速度要快过冷却速度。
Fabric
Temperature setting
Ironing recommendation
Acrylic
Dry iron on reverse side.
Acetate
Dry iron on reverse side while still damp or use spray to dampen.
Nylon & Synthetics
Iron on reverse side while still damp or use spray to dampen.
Rayon
Iron on reverse side of fabric.
Viscose
Mainly dry iron. Steam can be used under manufacturer’s instructions.
Silk
Iron on reverse side. Use an ironing cloth to prevent shine marks.
Cotton blends
Check label and follow manufacturer’s instructions. Use setting for the fibre
requiring lowest setting.
Wool & wool blends
Steam iron on reverse side or use ironing cloth.
Cotton
Dry iron while still damp or use spray to dampen. Use steam medium to high.
Corduroy
Steam iron on reverse side or use ironing cloth.
Linen
to “max”
Iron on reverse side or use ironing cloth to prevent shine marks, especially with dark
colours. Dry iron while still damp or use spray to dampen. Use steam medium to high.
Denim
to “max”
Use maximum steam.
Varied ironing speed and fabric dampness might cause optimal setting to differ from that recommended in the table.
Tips:
Always start ironing the fabrics that require low ironing temperature setting, and then increase the temperature setting for
fabrics which require higher temperature. The iron heats up faster than it cools down.
Ironing chart /
织物熨烫设置表
CNS
eN
8
