Air conditioner portable
11
Bottom tray
Drain outlet
When the water level of the bottom tray
reaches predetermined level, the digital dis-
play area shows "PI "and the WATER FULL
indicator light illuminates.
Carefully move the unit to a drain location,
remove the bottom drain plug and let the
water drain away.
Reinstall the bottom drain plug and restart the
machine until the PI symbol disappears. If the
error repeats, call for service.
NOTE: Be sure to reinstall the bottom drain
plug before using the unit.
WARNING
Before the cleaning of the air conditioner, it
must be shut down and the electricity must
be cut off for more than 5 minutes, otherwise
there might be the risk of electric shocks.
Ж Do not use gasoline, benzene, thinner or
any other chemicals, or any liquid insecticide
on the air conditioner, as these substances
may cause flaking off of the paint, cracking or
deformation of plastic parts .
Never attempt to clean the unit by pouring
water directly over any of the surface areas,
as this will cause deterioration of electrical
components and wiring insulation.
Clean the unit
When the unit is contaminated, clean it gently
with a wrung towel using tepid water below
40°C(104°F).
Clean the Air Filter
1. Remove the air filter Take out the upper air
filter and the lower air filter
Note
:There are two types about the low air
intake grille, please refer to Fig. 1 or Fig. 2.
If the low air intake with a srew, please remove
the srew at first.
Fig.
1
Fig.
2
2. Clean the air filter
Use a vacuum cleaner or water to rinse filter,
and if the filter is very dirty (for example, with
greasy dirt), clean it with warm water (below
40°C(104°F)) with mild detergent dissolved in,
and then put the filter in the shade to dry in
the air.
3. Reinstall the dried filter in reverse order
of removal. Put the filter cover back to its
place.
Note:
if you don’t use the unit for a long time,
please pull out the rubber plug to drain the
inside water out referring to right figure.
To save the cost of a service call, please try
the suggestions below to see if you can solve
your problem without outside help.
