10
www.electrolux.com
CNT
CNS
KR
ID
TH
VN
EN
TROUBLESHOOTING
SYMPTOM
CAUSE
SOLUTION
The blender does not switch on.
Jug/base are not fixed properly.
Check if all the
components are in correct
position.
Note! the jug can
only be placed on the
base with handle towards
the user interface.
The ON/OFF-button is not pressed.
Press the ON/OFF button
to switch on the blender.
The control panel will
illuminate when the
blender is switched on.
The motor has overheated. The
display is blinking.
Wait until the product has
cooled down and all the
buttons are lit.
The plug is not properly connected
to the power outlet.
Check the connection of
the plug to the outlet or try
another outlet.
Power outage.
Wait until power outage
is over.
Functional problem.
Contact authorized
service.
The motor stalls during operation
If the motor stalls,
switch off the blender
immediately, unplug the
appliance and let it cool
for at least 10 minutes.
Ingredients are too large.
Cut all firm fruits and
vegetables into pieces
no larger than 1.8 cm² to
2.5 cm².
Wrong ingredients.
The appliance intended
use is production of
beverages. Add fruits,
vegetables or similar.
Never mix ingredients
such as dough, mashed
potatoes, meat or similar
in the mini jug.
If the appliance is still not working, please contact Electrolux Customer Service.
