Electrolux E772F402BI User Manual Download Page 31

Page: 31 / 48

display and the given information

changes accordingly.

If a selection is not possible

an acoustic signal sounds

and the display shows

11.6 Starting a programme

Touch the Start/Pause

button to start

the programme. It is not possible to start

the programme when the indicator of the

button is off and doesn't flash (e.g.

programme dial on a wrong position).

The related indicator stops flashing and

stays on.

The programme starts, the door is

locked. The display shows the indicator

The drain pump can operate

shortly before the appliance

fills water.

11.7 Starting a programme with

the delay start

1. Touch the Delay Start button

repeatedly until the display shows the

desired delay time. On the display
the indicator shows .

2. Touch the Start/Pause

button.

The appliance door locks and starts

the countdown of the delay start. The
display shows the indicator

When the countdown is completed, the

programme starts automatically.

Cancelling the delay start after

the countdown has started

To cancel the delay start:

1. Touch the Start/Pause

button to

pause the appliance. The related

indicator flashes.

2. Touch the Delay Start button

repeatedly until the display shows
and the indicator goes off.

3. Touch the Start/Pause

button

again to start the programme

immediately.

Changing the delay start after

the countdown has started

To change the delay start:

1. Touch the Start/Pause

button to

pause the appliance. The related

indicator flashes.

2. Touch the Delay Start button

repeatedly until the display shows the

desired delay time.

3. Touch the Start/Pause

button

again to start the new countdown.

11.8 The SensiCare System

load detection

After touching the Start/Pause

button:
1. The SensiCare System starts

estimating the weight of the load to

calculate the real programme

duration. During this phase the Time
Manager bars

placed below the

time digits play a simple animation.

2. After about 15-20 minutes the Time

Manager bars disappear and new

cycle duration is displayed.

The appliance automatically adjusts

the programme duration to the load

to achieve perfect washing results in

the minimum possible time.

11.9 Interrupting a programme

and changing the options

When the programme is running, you

can change only some options:

1. Touch the Start/Pause

button.

The related indicator flashes.

2. Change the options. The given

information in the display changes

accordingly.

3. Touch the button Start/Pause

again.

The washing programme continues.

ENGLISH

Summary of Contents for E772F402BI

















































Search results

Summary of Contents for E772F402BI

Reviews:

Related manuals for E772F402BI

Brands by name

Popular brands

Electrolux E772F402BI, User Manual

Search results

Summary of Contents for E772F402BI

Reviews:

Related manuals for E772F402BI

Brands by name

Popular brands