manualshive.com logo in svg

Electrolux E30GF74GPS - 30" Pro-Style Gas Range, Technical & Service Manual, Page: 63 / 96

Share
Download
Electrolux E30GF74GPS - 30

63

faILUrE

The  oven  operates  in  broil, 

but not in bake.

The oven operates in bake, 

but not in broil.

Ovan  calibration  more  than 

20° off.

One  oven  light  does  not 

work. 

ChECK

1.  Turn the oven thermostat dial to 

a temperature.  Does the oven 

igniter glow?

2.  Measure the voltage drop 

 

between BA and neutral.  Does 

the  meter  read  line  to  neutral 

voltage.

3.  Measure the voltage drop 

 

between the input terminal of the 

oven  safety  valve  and  neutral.  

Does the meter read line to 

 

neutral voltage.

1.  Turn  the  oven  thermostat  dial 

to broil.  Does the  broil  igniter 

glow?

2.  Measure the voltage drop 

 

between BR and neutral.  Does 

the  meter  read  line  to  neutral 

voltage?

3.  Measure the voltage drop 

 

between the input terminal of the 

broil  safety  valve  and  neutral.  

Does the meter read line to 

 

neutral voltage?

1.  Is the correct knob on the oven 

thermostat?

Note:   On the 36 inch models.

 

 

The thermostat knob and  

 

the griddle knob can be   

 

switched.

1.  Defective light bulb or socket.

COrrECTION

Yes, defective igniter.

No, go to (2).

Yes, go to (3). 

No, defective oven thermostat.  

Yes, defective bake safety valve.

No, defective bake igniter.

Yes, defective broil igniter.

No, go to step (2).

Yes, go to step (3). 

No, defective oven thermostat.  

Yes, defective  broil safety valve.

No, defective  broil igniter.

Yes, replaced the thermostat.

No, put the correct knob the thermostat.

Replace a lightbulb if problem is not cor-

rected replaces socket.

Summary of Contents for E30GF74GPS - 30" Pro-Style Gas Range

































































































Reviews:

No comments