23
To remove the oven rack support
for a self-clean
cycle, support and lift front bottom of rack support to
release front tabs. Then, rotate rack support up and
out to release rear tabs. If the rack supports are not
removed, the self-cleaning cycle won’t start.
Figure 15
Removing and Replacing Oven Racks
ALWAYS ARRANGE OVEN RACKS WHEN THE OVEN
IS COOL (PRIOR TO OPERATING THE OVEN).
Always use oven mitts when using the oven.
To remove
an oven rack,
pull the rack forward. Lift up the rack off
the oven rack glides.
To install an oven rack
, locate
the two pinholes in the small plate at the front corner
of the rack. Position the back of the rack on the rack
glides and drop to pinholes over the pins on the rack
glides.
Figure 16
Figure 17
Figure 18
Arranging Oven Racks
ALWAYS ARRANGE OVEN RACKS WHEN THE OVEN
IS COOL (PRIOR TO OPERATING THE OVEN. Three
chrome-plated Smooth-GlideMR oven racks and one
chrome plated conventional oven rack are provided
with your range.
To bake on a single rack, place the rack in position 3.
To bake on 2 racks,place the racks in position 2 and
4.To bake on 3 racks, place the racks in position 1,3,5.
(See figure 19).