13
4. Press the “OK/START” button to confirm the choice and start the cycle
5. At this point, the LCD will display advisories, for example, such as no salt and/or no rinse-aid in the
machine (on free-standing models, text will appear against a red background)
Correct the problems displayed
NB: If the 3-in-1 detergent option has been chosen, the no rinse-aid advisory is disabled
6. Press the “OK/START” button again to start the programme. See fig. 6.
The following items appear on the LCD:
The name of the phase in progress
The
washing
temperature
The time remaining in minutes to the end of the cycle
The symbols that characterise the programme / phase in progress
The phase in progress, which flashes
4.2.1 Cancelling a programme
To cancel a programme after it has been started:
1. Press the “Cancel” button:
•
On free-standing models, the LED for the programme in progress begins to flash
•
The LCD displays “Interrupt?”
2. Press the “OK/START” button: the programme is cancelled and the machine sets itself to the cycle
selection mode with “Set the programme” on the display
3. At this point, a new cycle can be selected by following the instructions reported above at section 4.3.1.4
or 4.3.1.5, depending on the model.
NB: If the cycle has not yet been started, all the selections made can be changed by pressing the proper
buttons.
4.2.2 Interrupting
a
programme
To interrupt a programme in progress:
1. Shut off the machine by pressing the
S0
button
Press
button
S0
once again. The cycle resumes from the point at which it was interrupted.
OR
2. Open the door carefully
When the door is closed, the cycle resumes from the point at which it was interrupted, but with a
slight delay
NB: “Close the door” appears on the display while the door is open
Important: If the appliance is turned off or the door is opened for more than 30 seconds during the
drying cycle, the cycle will end after the regeneration phase and the appliance will be set to the cycle
selection mode when the machine is turned back on (the last cycle run will flash on the LCD).
fig. 6
Summary of Contents for DIVA
