Electrolux DIVA Service Manual Download Page 5

Page: 5 / 48

3 CONTROL

PANEL

The configuration of the control panel may vary with:

  Brand and appearance of unit
  Type of dishwasher: free-standing or built-in
  Type of circuit boards used
  Number of buttons for selecting programmes
  Number of buttons for selecting options
  Number of LEDs and/or configuration of LCD

3.1 LCD

These models use a new LCD display which can display the most common languages and all letters

of the alphabet, numbers and symbols.

Depicted above are the LCD displays used in free-standing and built-in models, with all elements lit.

Depicted below are figures and explanations of what may appear line-by-line on the display.

The first line shows

the current selection: programme

or options.

1. The segments below “

PROGRAMME”

identify the number of washing phases
included in the cycle selected

2. The segments below “

OPTIONS”

identify the

number of choices that are possible for the
option selected

The following may appear on the second line:

the name of the cycle selected

(while it is

being set)

2. once the cycle has started,

the washing

phases

in the cycle and the

temperatures

involved)

options selected/suggested

time to end of cycle

delayed starting

time

(in hours or minutes)

The following appears on the third line:

1. the

symbols

that identify the cycles and

options selected, or any advisories/warnings

Door is open

Certain types of programmes have been

selected

Delayed start time has been

selected

“Eco-drying” option has been selected

“Sanitize” programme has been

selected

Buzzer has been disabled

“Extra rinse” option has been

selected

@LINK connection

“3-in-1 detergent” option has been

selected

An advisory/alarm has occurred

“Bio detergent” option has been

selected

Free-standing model

Built-in model

Summary of Contents for DIVA

















































Search results

Summary of Contents for DIVA

Reviews:

Related manuals for DIVA

Brands by name

Popular brands

Electrolux DIVA, Service Manual

Search results

Summary of Contents for DIVA

Reviews:

Related manuals for DIVA

Brands by name

Popular brands