45
To interrupt a “demo-cycle” in progress:
1. Press "Cancel" button
once
1. INTERRUPT now appears on the display?
2. Press "OK/START" button to confirm
The following messages alternate on the display:
SET THE CYCLE
DEMO ACTIVE
NB: If the cycle that was running still flashes on the
display (this happens in the CONTINUOUS mode):
Press "Cancel" button once
The following messages alternate on the display:
SET THE CYCLE
DEMO ACTIVE
To exit the DEMO mode:
1. Press and hold down "Cancel" button
for at least 4
seconds
The following message appears on the display:
SET THE CYCLE
Summary of Contents for DIVA
