www.electroluxaircomfort.com 7
INDOOR UNIT DISPLAY
1. HEAT operation indicator - It lights when the
operation mode is HEAT.
2. COOL operation indicator - It lights when the
operation mode is COOL.
3. Temperature indicator - Displays the
temperature settings when the air conditioner
is in operation.
4. Power ON/OFF indicator - It lights when the
unit connected with power supply.
5. DEHUMIDIFY operation indicator - It lights
when the operation mode is DEHUMIDIFY.
REMOTE CONTROL
How to use the Remote Control
• Point the remote control to the signal
receiver of indoor unit.
• When the remote control sends out a signal,
the symbol will blink for about 1 second on
the display of the remote control. The indoor
unit will acknowledge the signal with a beep
when it receives an effective signal.
• Make sure there is no obstacle that may
interfere with the signal.
Location of the remote control
• Keep the remote control where its signal
can reach the receiver of the indoor unit (a
maximum distance of 8m is allowed).
• When you select the timer operation, the
remote control automatically transmits a
signal to the indoor unit at the specifi ed time.
• If you keep the remote control in a position
that hinders proper signal transmission, a
time lag of up to 15 minutes may occur.
Caution
• The air conditioner will not operate if curtains,
doors or other materials block the signals
from the remote control to the indoor unit.
• Prevent any liquid from falling into the remote
control. Do not expose the remote control to
direct sunlight or heat.
• If the infrared signal receiver on the indoor
unit is exposed to direct sunlight, the air
conditioner may not function properly. Use
curtains to prevent the sunlight from falling
on the receiver.
• If other electrical appliances react to the
remote control, either move these appliances
or consult your local dealer.
Reminder
When I FEEL operation is activated, the remote
control sends the temperature information at
its location to the indoor unit every ten (10)
minutes. If the indoor unit does not receive such
temperature information for successive eleven
(11) minutes, the air conditioner will quit I FEEL
operation and revert to normal operation.
