10 www.electroluxaircomfort.com
the louvre will stay at its last position.
9. Quiet Button - Press this button the indoor
fan operates at ultra-low speed, the indoor
noise is low. symbol will be displayed on
the remote control once the Quiet function is
activated. Quiet function and Turbo function
can not be activated at the same time. Quiet
function will be cancelled if the Quiet button
is pressed again, or if the mode or fan speed
is changed.
10. Sleep Button - Pressing this button to select
sleep mode , sleep mode , sleep
mode and cancel the Sleep mode.
Sleep mode
In COOL or DEHUMIDIFY mode, the set
temperature will increase 1°C after an hour,
and increase another 1°C after 2 hours, then
continue to run at this setting.
In HEAT mode, the set temperature will
decrease 1°C after an hour, and decrease
another 1°C after 2 hours, then continue to run
at this setting.
Sleep mode
In this mode, the air conditioner will run
according to a preset sleep temperature curve.
In COOL mode
• When setting the initial temperature between
16-23°C, after turning on the Sleep function,
the temperature will increase 1°C every hour,
after 3°C the temperature will be maintained,
after 7 hours, the temperature will be
decreased a further 1°C, after that the unit
will keep running at this temperature;
• When setting the initial temperature between
24-27°C, after turning on the Sleep function,
the temperature will increase 1°C every hour,
after 2°C the temperature will be maintained,
after 7 hours, the temperature will be
decreased a further 1°C, after that the unit
will keep running at this temperature;
• When setting the initial temperature between
28-29°C, after turning on the Sleep function,
the temperature will increase 1°C in the fi rst
hour, after 7 hours, the temperature will be
decreased a further 1°C, after that the unit
will keep running at this temperature;
• When setting the initial temperature to
30°C, after 7 hours the temperature will be
decreased 1°C, after that the unit will keep
running at this temperature.
In COOL or DEHUMIDIFY mode
• When the initial temperature is 16°C, the air
conditioner will continue to run at this setting;
• When the initial temperature is set between
17-20°C, the set temperature will decrease
1°C after the fi rst hour and continue to run at
this setting;
• When the initial temperature is set between
21-27°C, the set temperature will decrease
1°C in every hour, after two hours the air
conditioner will continue to run at this setting;
• When the initial temperature is set between
28-30°C, the set temperature will decrease
1°C in every hour, after three hours the air
conditioner will continue to run at this setting
Sleep mode
In this mode the sleep temperature curve is
manually set.
1. After selecting Sleep mode , press and
hold the Turbo button until the remote
control enters into user defi ned sleep setting
status. The remote control will display “1”
hour, temperature display will show the
corresponding temperature of last setting
sleep curve and blink (the original factory
setting will display for the fi rst use.)
2. Adjust the control buttons and to change the
set temperature for the fi rst hour of sleep.
After setting the temperature, press the
Turbo button for confi rmation
