background image

www.electroluxaircomfort.com  23

OPERATION TIPS

The following events may occur during normal 

operation:

Protection of the air conditioner.

•  Compressor protection - The compressor 

can’t restart for 3 minutes after it stops

•  Anti-freezing - If the unit is operating 

in COOL mode and in low ambient 
temperature, frost may be formed on 
the heat exchanger. When indoor heat 
exchanger temperature decreases below 
0ºC, the compressor will stop operation to 
protect the unit.

•  Defrosting - Frost may form on the outdoor 

unit in heating operation when the outdoor 
temperature is low but humidity is high, 
resulting in low heating effi ciency. During this 
condition the air conditioner will stop heating 
operation and start defrosting automatically. 
The time to defrost may vary from 3 to 12 
minutes. During defrosting, the fan motors 
of indoor unit and outdoor unit will stop, 
the indoor indicator fl ashes “H1” and the 
outdoor unit may emit vapour. This is not 
malfunction. After defrosting is fi nished, the 
heating operation will recover automatically.

•  Anti-cold air - In HEAT mode, the indoor fan 

will not operate in order to prevent cold air 
being blown into the room (within 5 minutes), 
if the indoor heat exchanger does not reach 
a minimum temperature under the following 
states: 

1.  Heating operation just start. 
2.  After auto defrosting is just fi nished. 
3.  Heating at low temperature.

Gentle breeze

The indoor unit may still run to blow out the rest 
heat of the indoor unit in the following situations:
1.  In HEAT mode, the temperature reaches the 

setting value, the compressor stops and the 
indoor fan still runs for 60 seconds.

2.  In HEAT mode, the unit is turned off, the 

compressor stops and the indoor fan still 
runs for 10 seconds.

A white mist coming out from the indoor 
unit

•  A white mist may generate due to a large 

temperature difference between air inlet 
and air outlet in COOL mode in an indoor 
environment that has a high relative humidity.

•  A white mist may generate due to moisture 

generated from defrosting process when 
the air conditioner restarts in HEAT mode 
operation after defrosting.

Low noise of the air conditioner

•  You may hear a low hissing sound when 

the compressor is running or has just stop 
running. This is the sound of the refrigerant 
fl owing or coming to a stop.

•  You also may hear a low “squeak” sound 

when the compressor is running or just 
stopped running. This is caused by heat 
expansion and cold contraction of the plastic 
parts in the unit when the temperature is 
changing.

•  A noise may be heard due to louvre restoring 

to its original position when power is fi rst 
turned on.

Dust is blown out from the indoor unit

This is a normal condition when the air 
conditioner has not been used for a long time or 
during fi rst use of the unit.

A peculiar smell comes out from the indoor 
unit

This is caused by the indoor unit giving off 
smells permeated from building material, 
furniture or smoke.

The air conditioner turns to FAN only mode 
from COOL or HEAT mode

When the indoor temperature reaches the 
setting value, the compressor will stop 
automatically, and the air conditioner turns to 
FAN mode.

The compressor will start again when the indoor 
temperature rises in COOL mode or falls in 
HEAT mode to the set point.

Summary of Contents for CXI09HL1W





























Reviews: