background image

www.electroluxaircomfort.com  21

6.  Install the healthy air freshening fi lters back in 

position.

7.  Install the upper portion of dust fi lers back 

into the unit, taking care that the left and right 
edges line up correctly and place dust fi lters 
into position.

Cleaning the Plasma Dust Collector

Warning

•  Stop the air conditioner and disconnect the 

power supply for at least 60 seconds before 
cleaning. Otherwise, it may cause electric 
shock or fi re.

1.  Pull the Dust fi lters out of the indoor unit.

2.  Hold the dust fi lter handle and lift it up slightly 

to take it out from the fi lter holder.

A clogged dust fi lter reduces the cooling/heating 
effi ciency of this unit. Please clean the fi lter every 
month or more often if necessary.

1.  Lift the indoor unit front panel up to an angle 

until it stops with a full support from the 
frame.

2.  Then pull the dust fi lter downwards out of 

the indoor unit.

3.  Hold the dust fi lter handle and lift it up slightly 

to take it out from the fi lter holder.

4.  Clean the Dust fi lter with a vacuum cleaner 

or water, then dry it up in cool place.

5.  The healthy air freshening fi lters (if applicable) 

like Active carbon fi lter / BIO fi lter / Vitamin C 
fi lter / HEPA fi lter, Silver ion fi lter are fi xed on 
the support frame of the dust fi lter.  Remove 
the healthy fi lters from the support frame 
of the dust fi lter.  Clean the healthy fi lters 
at least every three (3) months and replace 
every 6 months. Clean with vacuum cleaner 
if possible.

Summary of Contents for CXI09HL1W





























Reviews: