Electrolux CVE602, User Manual

Page: 15 / 40

5 button programmable clock (cont)
6. Once the set time has elapsed, a signal will sound for
1 minute. The time indication “0.00” and a flashing
“Minute minder” symbol will appear on the display.
7. To stop the signal, press any button on the clock.
8. To cancel the minute minder, press the button and the
display will flash. Then press and hold or buttons
together until the minute minder is cleared.
NOTE: This feature has no effect on the oven operation.
With the oven “Off” and minute minder operating, the time
of day cannot be displayed.
Elapsed time
When an oven function is selected (other than pyrolytic
clean), after 5 seconds the “Elapsed time” is displayed.
1. To reset the “Elapsed time”, press and hold both the
and buttons until the timer is reset.
Displaying the oven centre and set temperature (other than
pyrolytic clean function)
1. Press the TEMP. button when the oven is operating and
the “Oven centre temperature” is displayed.
2. Press the TEMP. button again within 5 seconds and the
“Oven set temperature” is displayed.
3. Alternatively, the TEMPERATURE selector can be toggled
left or right for 1 second and the “Oven set
temperature” is displayed.
NOTE: This temperature is displayed for 5 seconds.
Light operation
1. At any time, the oven lamp can be switched on or off
by pressing and holding the button for 5 seconds.
Activating the child-proof lock
When the child lock is engaged, the oven cannot be
operated and the door cannot be opened.
1. Switch the FUNCTION selector to “Off”.
2. Press and hold the CLOCK and buttons at the same
time until the word ‘SAFE’ is displayed and a double
beep sounds. The word ‘SAFE’ will be replaced by a
padlock symbol on the display after 5 seconds.
De-activating the child-proof lock
1. Press and hold the CLOCK and buttons at the same time
until a double beep sounds. This will commence to unlock
the door and after 5 seconds the oven is ready for use.
operating the programmable clock
Built-in Cooking OPERATING THE PROGRAMMABLE CLOCK 15
Switching the clock display ON and OFF
When the oven is off, the clock display can be switched on
and off.
1. Press together and symbols for 2 seconds to switch
off the display.
2. Press together and symbols for 2 seconds to switch
the clock display on again.
When the oven is off and the display is set to the ‘off’ state,
pressing the or buttons will display the time of day for
5 seconds then turn off the display.
NOTE: If a timer mode is set or the oven is operating, then
it is not possible to switch the display off.
Safety cut-out feature
The oven will automatically switch “Off” if the temperature is
not adjusted or the appliance is left operating for a period of
time. The oven switches itself off after:
1. 12.5 hours when the temperature is set between 30°C
and 120°C.
2. 8.5 hours when the temperature is set between 120°C
and 200°C.
3. 5.5 hours when the temperature is set between 200°C
and 250°C.
4. 3.0 hours when the temperature is set at 250°C.
How to exit DEMO mode
The oven can be set to operate in a demonstration mode
(e.g. in a retail store). The oven will not actually heat if it
has been inadvertently supplied in this mode. The following
instructions demonstrate how to exit this mode.
1. Ensure the oven is “Off”. Press and hold the button until
a beep sounds. The ‘Demo’ text on the display will flash.
2. While holding the button, turn the FUNCTION selector
to the first oven function until another beep is heard.
3. Then turn the FUNCTION selector to the ‘Off’ position.
4. Release the button.
5. Toggle and hold the TEMPERATURE selector to the right
until 3 beeps sound. The ‘Demo’ text will no longer
be displayed and the oven will function normally. If the
‘Demo’ text is still displayed repeat the above procedure.