27
6. With the pedestal drawer open for better access,
install the two #10 screws through the front
brackets in the pedestal into the service panel
bracket of the dryer.
7. After closing the pedestal drawer, carefully move the
dryer/pedestal assembly into position.
NOTE: Because of the increased weight
caused by the addition of the pedestal,
two or more people may be required.
NOTE: The dryer/pedestal assembly MUST be
on a solid floor and level for proper
operation. After leveling the
dryer/pedestal assembly, adjust the lock
nut on each leveling leg against the
pedestal base and tighten with a wrench.
Keep the leg extension at a minimum to
prevent excessive vibration.
8. Refer to the installation instructions that came with
the dryer to properly complete electrical and venting
connections. If questions arise, please refer to the
Owner’s Guide that came with the dryer for contact
information.
WARRANTY
Full One Year Warranty on Mechanical Parts
For one year from date of purchase, when this pedestal is installed with the listed washer or dryer (see
owners manual for specific model) and operated according to the information in the Use and Care Guide,
Operating Instructions and Installation Instructions, the supplier will replace any of its mechanical parts if
they are defective in workmanship or material. Keep your bill of sale. The date of the bill establishes the
warranty period should parts be required. This written warranty gives you specific rights. You may also have
other rights which vary from state to state.
Warranty Restriction
If the pedestal is used for any other purpose than private family use or used with any product that requires
modification for installation, the warranty is null and void.
Warranty Parts
Warranty parts are available by contacting the supplier where the pedestal was purchased or refer to the
Use and Care Guide that came with the washer or dryer that is installed on the pedestal for contact
information.
Sample warranty - always check
warranty with product