Beam Installation Design Manual to Email, Issue 3, 19/08/09, T.H.E Ltd, E&OE.
TOOLS REQUIRED
Electric drill
Hand-saw, mitre-block and sandpaper or
vacuum pipe-cutter (can be purchased from us)
Pencil
Cross-headed screwdriver
Flat-headed screwdriver
Jigsaw/hand-saw (to cut hole in plinth for VacPan)
55-66mm Hole-saw (66mm can help in a retro-fit situation if you need to get a
sweep 90 bend behind a plastered wall with the minimum of fuss and damage.)
h
If you require any help with the design or installation of the central vacuum
system in your home, please contact Beam Central Vacuums on
0845 260 0123
Our technical department will be happy to help 9am-5.30pm Monday to Friday.
90°Sweep
Bend
2003
45°Sweep
Bend
2005
90°Sharp
Bend
2007
Stop
Coupler
2002
Pipe
Bracket
2009
Mounting
Plate
2040
90°Sweep
Tee
2008
Solvent
Sealer
(120mm)
2014
& Plaster
Guard
2040
Wall Inlets
Duct
Beam Aspira Hose &
Deluxe Attachment Set
Appliance
Typical Basic Installation Components
A typical complete system will be delivered to site in approximately 3
boxes and a bundle of pipe.
Typical Components are:
j
Fittings
by