background image

6

This cooker hood can be used to recirculate or extract 

contaminated air.

Recirculation Mode

The cooker hood is supplied specified for use in the recir

-

culation mode with the charcoal filter fitted.

The contaminated air is cleaned by passing through the 

filters and than back into the kitchen.

The activated charcoal filter absorbs odours arising from 

cooking. In use it will slowly become saturated in grease 

and less effective. The filter normally requires changing 

after at least every three months or more frequently if the 

hood is used for more than three hours per day.

•  Remove the chimney angle bracket.

•  Screw  the  filter  cover  onto  the  air  outlet,  using  four 

screws 

12c

 (2.9 x 12.5).

•  Fix the air outlet grid 

8

 on the recirculation air outlet 

using the 2 screws 

12d

 (2,9 x 9,5) provided.

Extraction (Ducted)

The cooker hood is more effective when installed in the 

extraction mode (ducted to the outside).

Venting kits may be purchased through your retailer or DIY 

store, and must be evacuated through an outside vent of 

ø125 (5ins) or ø150mm (6ins).

The ducting used must be manufactured from fire retar

-

dent material conforming to the relevant British Standard 

or DIN 4102-B1.

When the cooker hood is ducted to the outside the 
charcoal filter must be removed.

When installing the ducted version, connect the hood to 

the chimney using either a flexible or rigid pipe ø 150 or 

125mm, the choice of which is left to the installer.

To install a ø 150 

•  Fix the pipe in position using sufficient pipe clamps  

  (not supplied).

To install a ø 120

•  To install a ø 120 mm air exhaust connection, insert  

  the reducer flange

 9

 on the hood body outlet.

•  Fix the pipe in position using sufficient pipe clamps  

  (not supplied).

•  Remove any activated charcoal filters.

OPERATING INSTRUCTIONS

��

���

���

Fitting the Ducting

•  To install the Ducting Version of  the hood, the optional 

Ducting chimney kit must be purchased.

 

Never do flambé cooking under this cooker 

hood.

 

Take extra care when frying and never leave 

frying pans unattended during use, as over-

heated fats and oils can catch fire.

 

Do not leave naked flames under the  cooker 

hood.

 

Ensure the hood is switched on before using the 

hob.

 

Ensure heating areas on your hob are covered 

with pots and pans when using the hob and 

cooker hood simultaneously.

 

Ensure not to damage the charcoal filter when 

cleaning or replacing as the activated charcoal 

inside is saturated with grease, which will stain if 

it comes into contact with clothing or furnishings.

�����

�����

Summary of Contents for AEG DD9996-B





















Reviews: