background image

5

OPERATING INSTRUCTIONS

Key Function

Display

A

Upper panel closed: when pressed for about two sec-ond it 

opens the upper panel. It switches the motor on at the latest  

selected speed.Upper panel open: when shortly pressed it 

switches the motor and the lights on/off. It stops all function 

and closes the panel

Indicates the selected speed.

B

Decreases the suction speed.

Number of lit LEDS decreases.

C

Increases the suction speed.

Number of lit LEDS increases.

D

Functioning only when the upper panel is open. This speed 

has been timed at 10 minutes. After that time the system ac-

tivates automatically the latest selected speed. The function 

is suitable for cooking conditions when vapours and smells 

are of the at most emission.

I flashes and all the LEDS on the display are lit.By pressing 

the key the function is deacti-vated.

E

Functioning only when the upper panel is open. By pressing 

this key it is possible to set up the motor to a suction speed 

at 100 m3/h . 

24

–symbol  appears  and  the  LEDS  on  the  display  go  off 

cyclically, one by one. By pressing the key the function is 

deacti-vated.

F

Functioning only when the motor is on. By pressing this key 

it is possible to set the delayed shutdown of the motor and 

the lighting to 30 minutes. 

A flashing 

clock

 symbol appears. By pressing the key the 

function is deacti-vated.

G

By pressing this key for about 2 seconds it is possible to 

reset

 

the filter saturation alarm. 

drop

 symbol indicates that the metal grease filters satu

-

ration alarm has been activated, and the filters need to be 

washed. The alarm is triggered after 100 working hours. C 

indicates that the charcoal filter satura-tion alarm has been 

activated, and the filter has to be replaced. The alarm s 

triggered after 200 working hours. 

H

By pressing this key the intensity of the lighting sys-tem can 

be modified up to five levels.

I

It switches the lights on and off (at maximum speed) inspite 

of the panel’s position.

L

Upper panel closed: when pressed for about two sec-ond it 

opens the upper panel .Upper panel open: when pressed for 

about two second it switches off motor and lights resetting 

every acti-vated function, and closes the  panel.

Keyboard lock

: it is possible to jam the keyboard when, for example, cleaning the glass. The motor and 

lights are switched off, and upper panel can be open or closed.By pressing the 

D

-key for about 5 secon-

ds the keyboard block can be activated or deactivated. This function is confirmed by a Beep and by an 

animation on the display.

Summary of Contents for AEG DD9996-B





















Reviews: