Technical Support - BSP
23/27
599 73 44-69
Rev. 00
X X
Failure code
X
F
1 = Oven Power Board Failure
2 = Oven User Interface Failure
3 = SMART board failure
4 = OUI-BB failure
5 =
6 =
7 = Hob failure
8 =
9 = General failure
0 =
F = Failure
11.3.6
DOORLOCK
TEST
(ONLY
FOR
PYRO
MODELS)
Next press of KEY_OK starts the locking of door.
If telescopic runners are detected, display shows first WINDOW_23. The telescopic runners have to be
removed to continue the door lock test. The door lock process starts automatically after the telescopic
runners were removed.
After successfully door lock the door is
unlocked again.
After that the factory test is done and
display shows an end message.
After this last item the oven has to be disconnected from the mains.
12.
ALARM CODE
To identify on which place a failure occurred the first value shows the failure place, described at following schematic:
FXXX
Cx
for customer errors / failures
KEY SYMBOL
