Electrolux 603877, Installation And Operating Manual

Page: 38 / 46

38
Anomaly Anomaly type Description Possible causes Actions
The upper plate
does not get
down Warning When trying to unlock
the upper plate it
does not move. The tube of the upper
plate or the upper plate
locking latch are gripped
in the upper position. Carefully try to unlock the tube.
WARNING
Risk of burning - cool the
machine or use gloves against
the heat.
Lubricate the unlocking mecha-
nism and the tube; if the
problem persists call Service.
The sandwich
has no grilling
textures Warning When the cooking
cycle is completed
there is no grilling tex-
ture on the upper side
of the sandwich.
The tube of the upper
plate or its mechanical
block are stuck in the
upper position, Carefully try to unlock the tube.
WARNING
Risk of burning - cool the
machine or use gloves against
the heat.
Call Service.
The sandwich is
squashed Warning When the cooking
cycle is completed
the sandwich lays
sqashed on the cook-
ing surface. The tube of the upper
plate or the upper plate
locking latch are gripped
in the lower position. Carefully try to unlock the tube.
WARNING
Risk of burning - cool the
machine or use gloves against
the heat.
Call Service.
Smell of burnt Warning The appliance
releases excessive
flavour of burnt. Lack of cleaning or accu-
mulation of grease/dirt/
debris.
Thoroughly clean the appliance
and increase the cleaning
frequency.
If the smell persists, call
Service.
Choke cover: dirt
or damaged Warning The choke cover
shows traces of dirt or
dark areas or holes
1. Lack of cleaning or
accumulation of
grease/dirt/debris;
2. Microwaves cooking
with empty cavity or
low mass of food.
1. Thoroughly clean choke
cover for removing grease/
dirt/debris;
2. Increase frequency of
cleaning;
3. In case of damages (cracks/
holes. call service for book-
ing the replacement of the
choke cover.
Lid conduit: too
rigid or damaged. Warning The flexible tube con-
necting the upper
plate wiring is exces-
sively rigid or shows
damages. Conduit rigidity increases
because of the upper plate
wires twisted too many
times in the same direction
while cleaning the upper
plate.
Damages will occur con-
sequently to the increased
rigidity.
1. Set free the upper plate as
for cleaning routine;
2. Find the correct twisting
direction for restoring the
original flexibility of the
conduit;
3. In case of conduit damages,
call service and report
findings.
Dirt Filters Warning The air filters show
traces of dirt / dust /
grease / debris: risk
of overheating High duty cycle and pollu-
tion from the room.
1. Remove the dirt using a
rag;
2. Remove the grease from
the louvers surface using a
rag soaked with degreaser;
3. Remove dust using a
vacuum cleaner;
4. Call Service and report the
above: filters replacement
may be needed.
CAUTION
If the problem persists, switch off the appliance, unplug the power cable and make sure that
nobody can use the appliance.