Electrolux 603877, Installation And Operating Manual

Page: 32 / 46

32
3. Help the descent of the upper heating plate by guiding the
flexible tube “ C “.
4. The upper heating plate has to stand upright on the glass
saver. The RTP fixing clips are visible on the upper part of
the top heating plate.
5. Just release the 4 clips and remove the RTP, replace it.
6. Place the replaced RTP on the clean top plate with the
grooves in the same direction and secure it with the 4 clips.
7. Put the upper heating plate in the original position. Guide
the flexible tube to avoid any damages.
IMPORTANT
• Make sure to fix the RTP only when the top
heating plate is clean.
• Respect the right position of the upper heating
plate. The symbols “FRONT“ must be as in the
picture.
K.2.1 Tip
It is advisable to purchase 2 RTPs in order to have one always
available for immediate replacement if the other is worn from
use.
L TROUBLESHOOTING
L.1 Suggestions for quality cooking
Problem Solution
The sandwich is not enough or to much
cooked. Select another program.
The core temperature of the sandwich is
too cold
• Increase the time of microwave.
• If the time of microwave is more than
the total time, increase also the total
time.
The core temperature of the sandwich is
too hot Decrease the time of microwave.
The top of the sandwich is burned Decrease the upper heating plate tem-
perature and (or) decrease the total time.
Make sure the RTP is clean and there
are no burnt residues that can act as an
insulator. Make sure that there is not any
dirt between the upper heating plate and
the RTP.
IMPORTANT
• The temperature of the upper heating
plate is the same for all the programs.
• The temperature of the bottom glass
is the same for all the programs.
The top of the sandwich is not enough
cooked Increase the upper heating plate tem-
perature and (or) increase the total time.
The bottom of the sandwich is burned Decrease the bottom glass temperature
and (or) decrease the total time.
The bottom of the sandwich is not
enough cooked
Increase the bottom glass temperature
and (or) increase the total time.
NOTE!
To modify the parameters see chapter «Advanced set up».
FRONT
360°
click!