Page 6
STEP 6 Replace Bypass Orifices
6-1 Make sure all knobs are in the off position.
6-2 Remove all of the burner knobs from the front of
the cooktop.
6-3 Insert the flat-blade screwdriver into the valve
stem hole for the left rear burner. Unscrew the
bypass orifice from the right side of the valve
assembly.
6-4 Identify the appropriate bypass orifice from
Table 6-1. Match both the model number and
the burner location. The bypass orifice’s size is
stamped on its head.
6-5 Insert the bypass orifice and the attached o-ring
into the right side of the valve with the needle
nose pliers. Tighten into place with the flat-blade
screwdriver.
6-6 Repeat steps 6-1 through 6-5 for the remaining
burner valves.
6-7 Replace the knobs.
Figure 6-1 Bypass Orifice Conversion
Burner
Location
E36GC76EPS
(36-Inch)
E48GC76EPS
(48-Inch)
Left Rear
61
61
Left Front
48
48
Right Rear
48
48
Right Front
61
61
Center Rear
61
61
Center Front
61
61
Table 6-1 Bypass Orifice Sizes (x 100 mm)
Valve assembly
Bypass orifice
Valve stem hole
