
8
Convection roast
65
To set the convection roast feature
65
Self-clean cycle
65
To set the controls for the self-cleaning cycle to
start immediately and shut off automatically
65
When the self-clean cycle is completed
66
Stopping or interrupting a self-cleaning cycle
66
How the ES 400 control system works
66
Preheat
66
Bake
66
Time bake
66
Convection bake
66
Convection roast
67
Broil
67
Clean
67
Calibration
67
To check oven calibration
67
To change the calibration
67
To adjust the oven temperature higher
67
To adjust the oven temperature lower
67
Troubleshooting
67
F1 code
67
F3 code
67
F9 code
68
Control will not program
68
Time bake does not operate
68
Convection bake and convection roast
68
Neither the fan motor or the assist element operates
68
If either convection bake or convection roast
operate normally but the other does not
68
Fan motor does not operate
68
Convection element does not operate
68
Control does not operate in preheat
68
Blank display
68
Bake element does not heat
68
Broil element does not heat
69
Oven door does not lock when the
oven is programmed for clean
69
Oven door locks but the oven does not heat
69
Door latch is partly closed with door open
69
Sample schematic for ES 400 control system
70
The ES 450 Electronic Oven Control System
71 - 80
How to program the ES 450
71
Clock
71
To set the clock
71
Changing between 12 or 24 hour time of day display
71
Continuous bake or 12 hour energy saving
71
To set the control for continuous bake
or 12 hour energy saving
71
Minute timer
72
To set the minute timer
72
To change the minute timer while it is in use
72
To cancel the minute timer before the
set time has run out
72
Oven lockout feature
72
To activate the oven lockout
72
To reactivate oven operation
72
Summary of Contents for 30" Electric/Microwave Combination Wall Oven
