
74
pads pressing 5 0 . “
TIMED
” will flash and
“
BAKE
”, “
00:50
” and “
350°
”
will show in the
display.
NOTE
: Baking time can be set for any amount of time
from 1 minute to 11 hours and 59 minutes with a
12 hour display mode and from 1 minute to 23
hours and 59 minutes with a 24 hour display
mode.
8
Press
Start
.”
TIMED
,
BAKE
” and
“350°”
will
appear.
9.
Press
StopTime
. Enter the desired stop time
using the number pads 5 3 0 .
10. Press
Start
. Once Timed Delay Bake has started,
the set oven temperature will disappear. “
TIMED
”,
“
DELAY
” and “
BAKE
” and the current time of time
will show in the display.
NOTE:
Once Timed Bake is actived, press
Cook Time
to display the cook time remaining in the Timed
Bake mode. Press
Clear Off
when baking has
completed or at any time to cancel the delayed
timed bake mode.
When the set bake time runs out:
1.
“End” will appear in the display window and the
oven will shut off automatically.
2.
The control will beep 3 times. The control will
continue to beep 3 times each minute until
Clear
Off
is pushed.
To broil:
When broiling, heat radiates downward from the oven
broil element for even coverage. The broil feature is pre-
set to start broiling at 550° F. However, the broil feature
temperature may be set between 400° F and 550° F.
CAUTION: DO NOT use the pan without its insert.
CAUTION: DO NOT cover the insert with foil. The
exposed grease could ignite. Should an oven fire
occur, leave the oven door closed and turn off the
oven. If the fire continues, throw baking soda on
the fire or use a fire extinguisher. DO NOT put wa-
ter or flour on the fire. Flour may be explosive and
water can cause a grease fire to spread and cause
personal injury.
To set the oven to broil:
(example
550° F)
1.
Place the insert on the broiler pan, then place the
food on the insert.
DO NOT
use the broiler pan
4.
Press 3 5 0 . “
350°
”
will flash and “
BAKE
”
will show in the display.
5.
Press
Start
. “
350°
”
and “
BAKE
“
will show in the
display.
6.
Press
Cook Time.
“
TIMED
” will flash; “
BAKE
”,
“
00:00
” and “
350°
”
will show in the display.
7.
Enter the desired baking time using the number
pads pressing 5 0 . “
TIMED
” will flash and
“
BAKE
”, “
00:50
” and “
350°
”
will show in the display.
NOTE
: Baking time can be set for any amount of time
from 1 minute to 11 hours and 59 minutes with a
12 hour display mode and from 1 minute to 23
hours and 59 minutes with a 24 hour display
mode.
8.
Press
Start
. Both the “
TIMED
” and “
BAKE
” icons
will remain on in the display. Once Timed Bake
has started, the current time will return in the
display.
NOTE:
Once Timed Bake is actived, press
Cook Time
to display the cook time remaining in the Timed
Bake mode.
9.
Press
Clear Off
when baking is complete or at any
time to cancel the Timed Bake mode.
Delay time bake - cook time and stop time:
The automatic timer will turn the oven
on and off
at the
time you select in advance.
To program the oven for a delayed start time and
to shutoff automatically:
(example bake at 350° F for 50 minutes finishing at 5:30)
1.
Be sure that the clock shows the correct time of
day.
2.
Arrange oven rack(s) and, if roasting or cooking a
casserole, place the food in the oven.
3.
Press
Bake
, “
—°
”
will show in the display.
4.
Press 3 5 0 . “
350°
”
will flash and “
BAKE
“
will show in the display.
5.
Press
Start
.
“350°”
and
“BAKE “
will show in the
display.
6.
Press
Cook Time.
“
TIMED
” will flash; “
BAKE
”,
“
00:00
” and
“350°”
will show in the display.
7.
Enter the desired baking time using the number
Summary of Contents for 30" Electric/Microwave Combination Wall Oven
