
111
Two screws from the bottom
2. Remove one screw from front of the inner door liner
and pull the hinge out.
One screw
Removing the inner door heat shield:
1. Remove the outer door glass and bottom trim.
2. Remove the six screws holding the shield to the
inner glass frame and lift the shield off.
Six screws
Removing the inner door glass frame:
1. Remove the outer glass, bottom trim and heat shield.
2. Remove the six screws holding the frame to the
inner liner and lift the frame off.
Six screws
Removing the inner door glass:
1. Remove the outer glass, bottom trim, heat shield
and inner glass frame.
2. With the frame removed the inner glass will lift out.
Lift glass out
Removing the inner door glass seal:
1. Remove the outer glass, bottom trim, heat shield,
inner glass frame and inner glass.
2. With the inner glass removed the seal will lift out.
Summary of Contents for 30" Electric/Microwave Combination Wall Oven
