background image

 40

5954 00U 01

GB

 INFORMATION - NOTES - WARNINGS 

Information area

Area displaying current 

Status, Error, Warning 

and Utility information.

Warning light signalling oven door open.

burner off

Error

Attention

Information

Queries

  UTILITIES 

Low speed cycle (fan): 

for gentle baking, 

such as light patisserie. Combinable with all 

cycles.

Pulsed speed cycle (fan): 

for low tempera-

ture cooking, ideal for maintaining cooked 

products, dehydrating or drying for vegetables 

or 

fi

 nishing food. Combinable with all cycles.

Normal speed cycle (fan):

 for normal cooking. 

Ideal for roasting, gratinating and classic 

cooking. Combinable with all cycles. (Default 

setting)

Manual injection of water in compartment: 

for instantly increasing the humidity level 

during a cooking cycle. Use the + and - buttons 

to adjust the injection duration in seconds (10 

s intervals).

Save Program

Programmed Start:  

allows the cooking cycle to be 

started later by setting the required time.

Multitimer: 

for setting cooking of foods at the same 

temperature but at different times (max. 14).

 MULTIPHASE

Cooking with phases in sequence

: for setting 

cooking programs with several phases in automatic 

sequence (max. 15 phases).

Active pause phase 

Add pause phase

: by entering a time value in this 

mode it is possible to delay the start of cooking pro-

grams or include a pause between two cycles (e.g. 

proving).

Active Maintaining Cycle phase.

Add Maintaining Cycle (70°C): 

for slow and prolonged 

cooking, typically for meat (large cuts). Activated at the 

end of cooking.
Combinable with all cycles.

 VARIOUS AND COMMON FUNCTIONS  

Compartment preheating: 

indicates that the oven is 

preheating the compartment (please wait). 

This phase can be skipped in MANUAL mode but not 

in AUTOMATIC mode.

SKIP PHASE:

 the next foreseen phase can be skipped 

for particular types of cooking. 

- Compartment preheating

 

(excluding AUTOMATIC)

- Low temperature phases (PREHEAT, SEARING)

Skip PHASES in Multiphase:

 one or more phases 

can be skipped during cooking with Multiphase.

  

  

Con

fi

 rm

Go back to previous page

Cancel space (Backspace)

Find Program

Custom

Summary of Contents for 236200

























Reviews: