11.10
Cleaning the inlet hoses
and the valve filters
Clean regularly both (for hot and for cold
water) inlet hoses and both valve filters.
1.
1
2
3
2.
3.
4.
45°
20°
11.11
Emergency drain
Because of a malfunction, the appliance
cannot drain the water.
If this occurs, do steps (1) through (9) of
'Cleaning the drain filter'. If necessary,
clean the pump.
When you drain the water with the
emergency drain procedure, you must
activate again the drain system:
1.
When you drain the water with the
emergency drain procedure, you must
activate again the drain system: Put 2
litres of water in the main wash
compartment of the detergent
dispenser.
2.
Start the programme to drain the
water
11.12
Frost precautions
If the appliance is installed in an area
where the temperature can be less than 0°
C, remove the remaining water from the
inlet hose and the drain pump.
1.
Disconnect the mains plug from the
mains socket.
2.
Close the water tap.
3.
Put the two ends of the inlet hose in a
container and let the water flow out of
the hose.
4.
Empty the drain pump. Refer to the
emergency drain procedure.
5.
When the drain pump is empty, install
the inlet hose again.
ENGLISH
61