WARNING!
Make sure that the
temperature is more than
0 °C before you use the
appliance again.
The manufacturer is not
responsible for damages
caused by low temperatures.
12.
TROUBLESHOOTING
WARNING!
Refer to Safety chapters.
12.1
Alarm Codes and Possible failures
The appliance does not start or it stops during operation. First try to find a solution to the
problem (refer to the tables).
WARNING!
Deactivate the appliance before carrying out any check.
With some problems, the display shows an alarm code and the
button may flash continuously:
Problem
Possible solution
The appliance does
not fill with water
properly.
• Make sure that the water tap is open.
• Make sure that the pressure of the water supply is not too
low. For this information, contact your local water authority.
• Make sure that the water tap is not clogged.
• Make sure that the filters of the inlet hoses and the filters of
the valves are not clogged. Refer to “Care and cleaning”.
• Make sure that the water inlet hoses has no kinks, damages
or bends.
• Make sure that the connections of the water inlet hoses are
correct.
The appliance does
not drain the water.
• Make sure that the sink spigot is not clogged.
• Make sure that the drain hose has no kinks or bends.
• Make sure that the drain filter is not clogged. Clean the filter,
if necessary. Refer to "Care and cleaning".
• Make sure that the connection of the drain hose is correct.
• Set the drain programme if you set a programme without
drain phase.
• Set the drain programme if you set an option which ends
with water in the tub.
The appliance door is
open or not closed
correctly.
• Make sure that the door is properly closed.
62
