23
G.5
Fastening multiple appliances together
Remove lower panel
A
by undoing the screws.
Push the units together. Use the adjusting screws
on the feet to bring the appliances to the same
height, then level them.
Screw the appliances together at the base using the
screw, washer and nut
B
. Replace panel
A
using
the screws.
Using a solid tool, break nuts
C
from connecting rail
D
.
Insert connecting rail
D
into the gap between the top,
making sure marking
E
is pointing forwards.
Connect the appliances by hammering nuts
C
into the
dedicated cut out.
Seal the whole length of the joint with long lasting
silicone. Attach the rail
D
using the supplied screws
F
.
Insert the hook on the underside of cover
G
into the
eyelets in the connecting rail and slide cover
G
backwards until it aligns to the front.
G.6
Side panels and base models
All side panels are available in two different versions:
•
Side panel with an overhang of 12,5 mm / 0,49″
for
individual mounting on walls.
•
Side cover without overhang.
Mount the faceplates onto the unit cladding when setting up. The faceplates suitable for your type of installation are available as
optional accessories.
1
2
A
A
A
A
B
3
4
D
C
C
D
E
D
F
G
