27
• Place the baskets with food to be cooked in the tank. The
overflow pipe ensures control of the maximum water filling
level and the removal of cooking froth.
To maintain the water level during cooking, turn capacity
control to position
B
.
K.5
The cooking process - bain marie
Set capacity control to position
C
.
This keeps the water at “bain marie level“ by continually filling it
with water.
If possible, preheat the appliance immediately before use, by
setting temperature control to level 4.
As soon as the water in the tank is boiling, carefully hang the
container with the food in the tank.
Use temperature control to adjust the heating of the tank to the
quantity and type of food to be cooked.
K.6
The cooking process - sous-vide
Set capacity control to position
C
.
If possible, preheat the appliance immediately before use, by
setting temperature control to level 4.
As soon as the water reaches the set temperature, slowly add
the vacuum-sealed food to the tank.
Use temperature control to adjust the heating of the tank to the
quantity and type of food to be cooked.
To maintain the water level during cooking, turn capacity
control to position
B
.
K.7
Stand-by mode
When preparing individual dishes, every so often there is a
short break in the cooking process. You can save energy by
turning control to
.
In standby mode, the appliance stands at a preset default
temperature.
You can start the cooking process again in a few minutes.
For prolonged downtimes, switch off the appliance to avoid
unnecessary energy consumption.
WARNING
The appliance's heat surfaces
and cooking pan can be very hot
even in standby mode.
K.8
Empting the tank
• At the end of the cooking always empty the tank for avoiding
corrosive deposits.
• Empty the tank by operating on the knob of the draining
valve located behind the door.
• Always wait the water cools down till 60
℃
/ 140
℉
before
emptying the tank.
IMPORTANT
In some countries, the machine requires an acces-
sory kit to measure the maximum water outlet
temperature. Observe country-specific regulations
and
consult
our
Customer
Care
Service
if
necessary.
K.9
Main switch (optional)
This appliance has a ventilation system that protects electronic
components from overheating.
In case of cutting off the main power supply, this ventilation
system can’t work, causing serious damage to the appliance.
CAUTION
After switching off the appliance, wait at
least 30 minutes before cutting off the
power with the main switch.
K.10
Handrail (optional)
For correct assembly/disassembly of the handrail, refer to the
dedicated installation instructions.
CAUTION
If the handrail is present, do not place on it
more than 25 kg per meter of structure.
L
APPLIANCE CLEANING AND MAINTENANCE
WARNING
Refer to “
L.1
Care information
Care operations have to be carried out by the owner and/or
user of the appliance.
IMPORTANT
Problems resulting from poor or lack of care as
hereinafter described will not be covered by the
warranty.
L.2
Cleaning introduction
In order to reduce the environmental impact of pollutants it is
advisable to clean the appliance (externally and, where
necessary, internally) with products that are more than 90%
biodegradable.
max.
min.
OFF
V
V
min.
max.
OFF
stb
