Electrolux Professional IC43316, Operating Handbook

Page: 31 / 40

01103042
Page Notice Date
OPERATING
HANDBOOK
0606 6
6
6. Maintenance
Motors :
The fan motor is permanently lubricated.
The movement motor is permanently lubricated.
Bearings :
Permanently lubricated.
Heat control :
Make sure that the shoe of the thermostatic control and the safety control devices are always
clean and in cylinder contact.
Gas heating :
Check annually the good working of the burner (removal and blowing).
Check and clean the lint filter regulary.
Cylinder :
The cylinder must be kept very clean to make ironing easier and must be of a very high qua-
lity.
Deposits of washing powder or lime must be removed as soon as they start to affect the
quality of the ironing.
The use of VERY FINE saddle grinder ONLY is recommended (grain 180 or Scotch Brite 3M
BFB-AM).
THIS SHOULD BE RUBBED IN THE SAME DIRECTION AS THE LINEN IS PASSED
THROUGH THE MACHINE.
Should the machine be stopped for a long period, in order to avoid any oxidation of the cylin-
der, a sheet impregnated with paraffin wax should be fed through the machine.
Using an old sheet, grate a little paraffin wax onto half of the unfolded sheet, fold in half and
then run it through the flatwork-ironer while it is still hot enough.
If the machine is to be left unused for a longer period, it is advisable to oil the cylinder slightly
(anti-rust oil ref. 96010012).