manualshive.com logo in svg

Electrolux Professional IC43316, Operating Handbook

Share
Download
Electrolux Professional IC43316 Operating Handbook Download Page 26

01103042

Page

Notice

Date

OPERATING 

HANDBOOK

0905

1

6

6. Maintenance

CAREFUL
SHUT OFF THE POWER SUPPLY OF THE MACHINE BEFORE ANY MAINTENANCE OR 

REPAIR INTERVENTION IS CARRIED OUT  AND MAKE SURE THAT THE CYLINDER IS 

COLD.

DAILY (8 h)

1.

Check that the finger protection is working.

WEEKLY (40 h)

2.

Clean the fan grates of motors.

3.

Clean the stripper fingers and the thermostat attachment.

4.

Clean the ironer external, from dust.

G.

Clean the fluff filter with suction device.

G.

Clean the cover filter with suction device.

MONTHLY (170 h)

5.

Check that the parting strips are intact and replace if necessary.

EVERY SIX MONTH (1000 h)

6.

Slightly grease the chains (see lubrication table in the handbook).

7.

Clean and check the support rollers of the cylinder.

8.

Check that the crank is working.

9.

Check that the electrical connections are shut off on the supply terminal.

10.

Clean the whole suction device.

11.

Check the heating elements, wires and connections (only for electric heated machines).

12.

Clean the gas filters (only for gas heated machines).

13.

Check the condition and tension of the ironing strips and of the clips.

14.

Check the feeding bands, their drive and the clamps.

15.

Check that the thermostat is working.

16.

Clean the ironer internal, from dust.

Preventive maintenance

Summary of Contents for IC43316









































Reviews:

No comments

Brands by name

Popular brands

Load more brands