14
Installation manual
7 Electrical connection
The electrical installation may only be performed by qualified personnel.
The drying cabinet must be connected to an all-pole circuit breaker.
Heating options
Mains voltage
Hz
Heat output
kW
Total output
kW
Recommended fuse
A
Electrically heated
230V 1N ~
50
6.0
6.2
30
400V 3N ~
50
6.0
6.2
10
Loosen the two screws (Torx T20) on the underside of the front panel, square hole in the frame. Slide the front panel
upwards until it detaches from the guide flanges. Then remove it.
fig.W01240
