manualshive.com logo in svg

Electrohome VistaGraphX 5000, User Manual, Page: 60 / 116

Share
Download
Electrohome VistaGraphX 5000 User Manual Download Page 60

Downloaded from Projector.com

23(5$7,21

9LVWD*5$3+;

8333

8VHU

*

V 0DQXDO

6067

)LJXUH

60471

3UHIHUHQFHV 0HQX

,PDJH 2ULHQWDWLRQ

Choose from Front, Rear, Inverted Front, Inverted Rear
according to your installation. If the setting is incorrect,
the image will be reversed and/or upside down. See 2.6,
Operating Orientation for an illustrated explanation.

/DQJXDJH

Choose to display menu text in English, French, German, Italian or Spanish.

6RXUFH

2

&KDQQHO 6HOHFWLRQ

Choose how you want to select sources/channels from the 

&KDQ

key. Choices are 1-digit entry, 2-digit entry, or a scrollable list
of sources/channels (note that each source to be included in the
list must also be tagged in the "In Menu" checkbox in the
Channel List menu).

/DPS 3RZHU

This option does not apply to this projector and is disabled.

'LVSOD\ 6OLGHEDUV

If checked, will allow direct slidebars to be superimposed over the current image
when an adjustable parameter is selected. These slidebars include volume,
contrast, brightness, position, pixel tracking and phase, and others. If unchecked,
direct slidebars (or any from shortcut codes) will be invisible during adjustment.

'LVSOD\ (UURU 0HVVDJHV

If checked, on-screen messages will notify you of errors as they occur. See 3.9,
Error Messages.

Summary of Contents for VistaGraphX 5000





















































































































Reviews:

No comments