Electrohome VistaGraphX 5000, User Manual, Page: 53 / 116

Downloaded from Projector.com
23(5$7,21
9LVWD*5$3+; 8333 8VHU * V 0DQXDO
605:
If desired, you can display a portion of your image “full screen”
(like a zoom): reduce the Capture values as desired, so that less of
your image will appear, then select “full screen”.
•
6(/(&7 ´$1$0253+,&µ
to display an entire “wide-screen”
(anamorphic) image in its native 16:9 aspect ratio. The image will
fill the screen from left-to-right, but will not use all vertical pixels
available (top and bottom will be black). In addition, the Display
values will change to reflect the 16:9 ratio — the Horizontal value
will be 1024 and the Vertical value will be 582. If you do not choose
the anamorphic option when a non-HDTV anamorphic (wide-
screen) image is present, the image will be vertically stretched into a
4:3 image.
Select any of the following options to alter your image. Refer to "Using
Slidebars and Other Controls" (above) if you need help in selecting options and
accepting changes. Changes made to the Image Settings menu will be saved
when you exit the menu (press
([LW
).
)LJXUH 60441 ,PDJH 6HWWLQJV 0HQX
&RQWUDVW
+ 6+257 &87 =
)XQF
from presentation level. Or use
key.)
Increases or decreases the perceived difference between light and dark areas of
your image (0-100). If contrast is set too high, the light parts of the image lose
,PDJH 6HWWLQJV
ö