ELECTROCOMPANIET EMP 2, Owner'S Manual

Page: 27 / 91

I N S T A L L A T I O N
21
Custom Installation
External IR (Infrared Remote) Installation
The ELECTROCOMPANIET EMP 2 Blu-Ray Disc Player features an IR IN port on its back panel. If the
player is to be installed in an equipment cabinet where direct line-of-sight is not available for remote control,
your custom home theater installer can purchase an external IR Remote Sensor and plug it into the IR IN port.
Place the sensor head at a location where there is direct line-of-sight to ensure reliable operation.
NOTE
•
When an external IR sensor is plugged in, the original IR sensor window on the front
panel will be disabled.
•
ELECTROCOMPANIET cannot guarantee that the IR IN port will be compatible with
devices that are not manufactured by ELECTROCOMPANIET.
•
Connecting the IR IN port to an incompatible device may result in damage to the
connected device or the player.
•
Please contact ELECTROCOMPANIET customer support if you plan to integrate the
player into an IR distribution system. Customer support can provide recommendations
on how to properly connect the control signals.
IR IN Signal Identifications
Tip: IR carrier signal
Sleeve: Ground
3.5mm Mono Plug
RS232 Control
The EMP 2 has an RS232 control port and can be integrated into most custom home theater control systems.
Please ask your custom installer to contact ELECTROCOMPANIET for the RS232 control protocol.