6
USING AN EXPRESSION PEDAL
1.
Connect your expression pedal to the EXP/FSW jack.
2.
While the EXP MODE button is off, the expression pedal acts like a
volume control for your dry signal before it enters the Oceans 12.
3.
While the EXP MODE button is enabled, the expression pedal sweeps
all parameters that are assigned to it for the current Reverb Type of
the selected dual reverb.
4.
You may assign any knobs you like to be swept by the expression
pedal. Additionally, each knob may have a custom range and direction.
See page 31 of the manual to learn how to create an Expression
Setting for each Reverb Type of both dual reverb selections.
SAVING A PRESET
1.
Once you have created a sound that you would like to save, press and
hold the REVERB TYPE knob.
2.
After half a second, the PRESET LED will begin blinking rapidly.
Continue holding down the REVERB TYPE knob.
3.
After two seconds of holding down the REVERB TYPE knob, the
PRESET LED will stop blinking and light up solid. You can now release
the REVERB TYPE knob.
4.
Your preset is saved in the currently selected Reverb Type. You may
save one preset for each of the 12 Reverb Types of Reverb A, and one
preset for each of the 12 Reverb Types of Reverb B.
RECALLING A PRESET
1.
Turn the REVERB TYPE knob to the Reverb Type you want to recall.
2.
Press and release the REVERB TYPE knob. The preset sound loads and
the PRESET LED lights solid.
3.
If you turn a knob or change a button setting, the PRESET LED will
blink rapidly to indicate a preset is loaded but the setting has been
altered.