Electro-Harmonix OCEANS 12, Quick Start Manual, Page: 32 / 40

32
Factory Default Expression Settings (for both Reverb A and B)
Reverb Type Default Expression Pedal Control (EXP MODE = On)
Room Wet FX Level
Spring Reverb time
Plate Wet FX level
Reverse Modulation depth
Echo Feedback
Trem Rate
Mod Wet FX level
Dyna Wet FX level
Auto-Inf Reverb time
Shimmer Wet FX level
Poly Control 1
Resonant Amount
CREATING CUSTOM EXPRESSION SETTINGS
Your Oceans 12 comes set up from the factory with some useful
Expression Settings for each Reverb Type, but you might want to create
your own. Here’s how to create custom Exp ression Settings:
1. Turn the REVERB TYPE knob to select the Reverb Type for which you
want to create a custom Expression Setting.
2. Press and hold the EXP MODE button. After one second, the other
illuminated buttons (such as TAILS) will blink.
Note: The FUNCTION
button will be made unavailable while creating custom Expression
Settings
3. Once the other buttons stop blinking, release the EXP MODE button.
EXP MODE will now be blinking.
4. Set any of the Oceans 12 ’s six knobs to the position you want them
to have at the expression pedal’s heel position. If you do not want a
knob to be swept by the expression pedal, do not move it at this point.
Note: the only knobs that cannot be controlled by an expression pedal
are REVERB TYPE, and the alternate FUNCTION parameters (INF LVL,
SEND LVL, LO-FI, TIDE, SRS/PRL, and A
→
B).
5. Press and release the EXP MODE button to save the heel settings. EXP
MODE blinks rapidly now.
6. Set the six knobs to the positions you want them to have at the
expression pedal’s toe down setting. Again, if you do not want a knob
to be swept by the expression pedal, do not turn it.
7. While setting the knobs for toe-down position, you can move the
expression pedal to hear how the Expression Setting will sound.
8. You can go backwards to set the heel-down position again by pressing
& holding EXP MODE for 2 seconds.