5
ASSEMBLY
Chopper Assembly
1.
Position the driver on
to the motor base.
2.
Position
the
processing bowl over the driver and turn clockwise
to
lock the bowl firmly on to the motor base.
3.
Place the blade adaptor onto the driver.
4.
Place the chopper onto the blade adaptor.
5.
Turn the chopper to the right position.
6.
Place the lid on the bowl, turn the lid clockwise until
it
locks onto the bowl.
7.
Place the pusher into the feeding chute
Notes:
Always ensure the
chopper is fully
installed before feeding food into the food processor
Use the pulse function several times to avoid cutting too fine. Do not run the
unit for too long while cutting hard cheese or chocolate. Otherwise these
materials will overheat and begin to melt
Standard chopping period: 30-60 Seconds - If after 60 seconds more
chopping is required please leave the unit 5 minutes to cool before resuming
Kneading Disc Assembly
1. Position the driver on to the motor base.
2. Position the processing bowl over the driver and turn
it clockwise to lock the bowl onto the motor base.
3. Place the blade adaptor onto the driver.
4. Place the kneading disc onto the blade adaptor.
5. Turn the kneading disc to the right position.
6. Place the lid on to the bowl, turn the lid clockwise until
it locks on to the bowl.
7. Place the pusher into feeding chute
Processed Food
Measurement per batch
Flour
/
Soft
≤ 400g
Processed Food
Measurement per batch
Chocolate
≤ 100g
Cheese
≤ 200g
Meat
≤ 500g
Tea or Spice
50 - 100g
Fruit and Vegetable
100 - 300g
Onion
≤ 500g
Wash all parts except motor base in warm, soapy
water. Rinse and dry immediately.
DO NOT PUT ANY PARTS IN A DISHWASHER. DO
NOT IMMERSE MOTOR BASE IN WATER.
1
