6
FAN SPEED
Use this button to set the fan speed between low, medium, high and automatic (the corresponding symbol
on the display will flash). The fan speed in the automatic setting is determined by the difference between
the desired temperature set and the room temperature.
COOLING MODE
1.
Repeatedly press the
MODE
button until the
COOL
indicator appears.
2.
Set the desired temperature using the
TEMPERATURE
up and down buttons.
3.
Use the
FAN SPEED
button to set the fan speed.
HEATING MODE
1.
Repeatedly press the
MODE
button until the
HEAT
indicator appears
2.
Set the desired temperature using the
TEMPERATURE
up and down buttons.
3.
Use the
FAN SPEED
button to set the fan speed.
FAN MODE
1.
Repeatedly press the
MODE
button until the
FAN
indicator appears.
2.
The temperature settings will not affect the fan operation
3.
Use the
FAN SPEED
button to set the fan speed.
DEHUMIDIFY MODE
1.
Repeatedly press the
MODE
button until the
DEHUMIDIFY
indicator appears.
2.
The
FAN
button does not work in dehumidify mode. The fan speed will always be low in this mode.
Also temperature cannot be adjusted in dehumidifying mode
AUTO MODE
1.
Repeatedly press the
MODE
button until the
AUTO
indicator appears. Set the desired temperature
under auto mode to the required level between 16~32 °C
2.
The difference between the set temperature and the room temperature determines how the air
conditioner operates: cooling, heating or fan.
3.
Once the temperature is set in auto mode it is not possible to amend it. It the desired temperature
requires changing, change the unit out of Auto mode before changing it back.
4.
The unit will operate in the auto selected mode until set temperature is reached than switches the
compressor off. Mode is locked until reset via mode button.
5.
You can use the FAN button to set the fan speed while in Auto mode.
6.
All indoor units must be operating in the same mode, otherwise a mode mismatch error will show.
SLEEP MODE
During sleep mode the unit will operate with a low fan speed to minimise the operational noise of the unit.
1. Press the
SLEEP
button
2. Set the desired temperature.
3. Press the
SLEEP
button;
SLEEP
indicator will appear on the display. Cancel the sleep mode by
pressing this button again.
CLEAN (Not available on all models)
When pressed while the unit is in standby mode, the unit will power on in high speed fan mode, and run
through the cleaning mode, before returning to standby mode.
Summary of Contents for eiQ-3MS9K9K9K
Page 13: ...13...