18
To avoid damaging the
pipework during unrolling.
Ensure the packed soft pipes
are vertical before extending
Please do not extend only
one side of the pipework,
as this could kink or
damage the pipework
Please make use of a
semicircle pulley to keep the
allowed bending angle
Ensure the bends are not
too severe, as this could
restrict refrigerant flow,
reducing performance or
preventing operation.
Please use a twisting wheel to
avoid improper bending.
Over bent soft pipes will
lead to irregular bending
Please use a rigid elbow to
maintain the bending angle
while soft pipes operating.
Avoid bending the pipe where
possible, where bends are
necessary their radius should
be kept as large as possible.
Do not use short sharp
angle bends.
Notes:
Please ensure you use the protective plastic tube and sleeves before passing the copper pipes through
the wall in order to avoid pipe damage.
Summary of Contents for eiQ-3MS9K9K9K
Page 13: ...13...