• The appliance should not be installed in laundry or wet rooms where the
humidity is higher than 85% RH
• Do not dry laundry above the unit to prevent water entering the dehumidifier.
Place the laundry at least 1 meter away from your dehumidifier.
• Do not place the unit next to heat sources (e.g. Electrical fires, fireplaces, etc.)
Energy Saving and Unit Safety Protection Tips
• Do not cover or restrict the airflow from the outlet or inlet grills.
• For maximum performance the minimum distance from a wall or objects
should be 20 cm
• Keep the filters or grills of the unit clean. Under normal conditions, filters or
grills should only need cleaning once every three weeks (approximately).
Since the filters remove airborne particles, more frequent cleaning maybe
necessary, depending on the air quality. Vacuum and wash the mesh filters with
hot soapy water and dry them before placing them back in the unit
Installation
Remove any water from the water tank before starting the unit. In order to
save energy, do not open windows or doors while the unit is running. Place the
unit on a hard / flat surface. On first use run the unit continuously for 24 hrs.
To reduce noise levels:
Place a piece of carpet or a rubber mat under the unit to reduce any vibrations
while the unit is running.
CDW12L dehumidifier uses compressor technology to extract water from
the environment. The compressor dehumidifiers are ideal for normal
domestic or office environment which heated during the winter months
with temperatures above 12-15⁰C.
CDW12L is easy to move around on castors and is an intelligent
dehumidifier which will extract unwanted humidity while saving money due
to their humidistat and power saving logic. CDW12L features an intelligent
humidistat which is adjustable in increments of 5% from 35-80% RH
insuring your room is not dried too much and power is not wasted.
2
All manuals and user guides at all-guides.com