Elecro Engineering H.R.UV-C SPA-PRO, Installation And Operating Manual

Page: 18 / 24

18
STEP THREE
Cut the two black securing ties at either end of the
tube. This will then release the tube, which can be
discarded.
STEP FOUR
Take the replacement tube and re-attach
connection points. Loop securing ties in place in
order to seal to the connection points. Once
securely in place cut the excess tie and dispose of.
STEP FIVE
Place dosing tube into position on the left-hand
side. Carefully rotate the cam clockwise, whilst
feeding the pipe back into place.
STEP SIX
Replace the suction and output tubes on to the
connection caps and rotate to secure tubing back
into place. Replace clear cover and screw into
position.