29
Copy and paste channel encode
Step 1: Choose Channel 1, set the parameters. (Refer to Single Channel Encode)
Step 2: Click “Advanced”, then click “Copy”. Choose channel 2, then click “OK”.
Step 3: Set other channels using the same method.
(2) Extra Stream Set
Applicable to client-end and mobile phone monitoring.
Step 1: Choose the channel for extra stream set.
Step 2: Configure the related parameter. (Refer to Single Channel Encode)
B. GUI
Enable or disable “Time Display”, “Channel Title”, “Recording Status”, “Alarm Status”,
“Deflick” according to your own habit. Also, you can adjust transparency and resolution in
the same time. Remember to click “OK” after the setting.
C. GUI Display
You can view or edit channel title. Enable or disable time display, channel title, region cover.
After the set, click "OK" to save the settings.
D. PTZ Config
By setting “Protocol”, “Address”, “Baudrate”, “Data Bits”, “Stop Bits”, “Parity”, you can control
PTZ device. Please click “OK” after the setting.